Skip to content Skip to sidebar Skip to footer

How To Flashing Lenovo A590 Via SP Flashtool

On this page we shared Tutorial Flashing Lenovo A590 software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or virus. could lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driver. you can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user data. but sometimes the damage is not quite in this way. You also need to update your Android phone.

  • The following tools Lenovo A590
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo A590 from here
  6. All Stock Rom Lenovo from here

  • Tutorial Update Firmware Lenovo A590 :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

Complete Tutorial : How to Using SP Flashtool

Source :