Skip to content Skip to sidebar Skip to footer

Tutorial Flashing Asus 4S T00Q Via CMD

Tutorial Flashing Asus Zenfone 4S T00Q Via Adb cmd windows. because rooting error, the internal memory is full, to result in a boot loop. worse can be up Hard brick total dead . but as long as they can enter into Droidboot by pressing (Power + Volume up) can still be done flashing the firmware upgrade. As for how to flashing zenfone 4s via ADB can follow the instructions below
  • Tool Before Flash:
  1. Download ADB fastboot here 
  2. Download Intel USB Driver here 
  3. Download System.img.gz here  (832 MB)
  4. Download Boot.img : here
Tutorial Flash Asus 4S T00Q:
  1. Download and Install Intel USB Driver
  2. Download and Ekstrack ADB fastboot
  3. System.img.gz (don't extrack) with Boot.img to folder ADB
  4. Turn Off Zenfone 4S ( 4S )  go to Droidboot with (Power Volume + up)
  5. Connecting zenfone 4s On your Computer
  6. In Folder ADB, select" Open Commond Windows Here "
  7. On CMD write :
typing on CMD

fastboot erase cache

(enter)

fastboot erase userdata

(enter)

fastboot erase system

(enter)

fastboot reboot-bootloader

(enter) wait Droid boot vision show up again,  next

fastboot flash system system.img.gz

(enter)
wait a moment

fastboot flash boot boot.img
(enter)
after Complete,

Fastboot reboot-bootloader

(enter)

last:

fastboot reboot

(Enter) flashing Finish
  • Zenfone 4s will restart with new firmware. Good Lucky

Source : https://firmware.zonexweb.com/2015/07/tutorial-flashing-asus-4s-t00q-via-cmd.html